bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about GMC Acadia Limited


  • Recommended Aries Nerf Bars for a 2017 GMC Acadia Limited
  • I do have a pair of Aries running boards that will fit your 2017 GMC Acadia Limited but I spoke to my contact at Aries and they informed me that they do not have a mounting bracket set confirmed to fit your vehicle and the Aries AdvantEdge Tube Steps part # AA2055875 at this time. For a set of Aires running boards that hang down about 2"-3" from the bottom of the cab that are a confirmed fit for your vehicle, I recommend using the Aries Round Nerf Bars part # AA204031-2. These nerf bars...
    view full answer...

  • Using the Thule Motion XT XXL Cargo Box on a 2017 GMC Acadia Limited
  • The Thule Motion XT XXL, part # TH629907 can fit onto most factory crossbars, thanks to its incredibly flexible clamps. These are shared across the Motion cargo box line. However, the spread of your crossbars will need to be measured. You'll measure from the center of the front bar to the center of the rear bar. All boxes will have a certain range of crossbar spreads that they will fit. Another concern is with how well it lets your rear hatch operate. You can verify the fit prior to...
    view full answer...

  • Will Curt T-Connector Wiring Harness # C56245 Work with Hopkins Fold-Over Mounting Bracket
  • I went out to the warehouse so I could physically test the fit of the 4-Way on the Curt T-Connector Wiring Harness # C56245 and the Hopkins Fold-Over Mounting Bracket # HM48595. I found that the 4-Way connector, along with the dust cap, were just a bit too large to allow the folding bracket to securely close around the unit. This particular bracket will not be the best mounting option for this harness. I instead recommend looking at the Tow Ready Mounting Bracket # 18144. You can use...
    view full answer...

  • What Is The Weight Capacity Of The Westin Sure-Grip Running Boards Part # 27-6125-1835
  • I do have a running board kit that will support you, however, I called my contact at Westin Automotive and unfortunately they were not able to give me a weight capacity rating for the Westin Sure-Grip Running Boards w/ Custom Installation Kit part # 27-6125-1835. I recommend using the DeeZee NXc Running Boards w Custom Installation Kit part # DZ16202-16210 as these are a confirmed fit for your 2017 GMC Acadia Limited and have a weight capacity of 350 lbs. They also come with everything...
    view full answer...

  • Will The Thule Compass Kayak Carrier Fit Factory Crossbars On 2017 GMC Acadia?
  • The Thule Compass Kayak and SUP Carrier # TH890000 is designed to fit round, square, aero, elliptical, and most factory crossbars. According to Thule, as long as you have the factory installed crossbar going side to side on your roof then this will work just fine. This kayak carrier has a weight of 130lbs. If you only have the factory rails going front to back on your 2017 GMC Acadia then you will need to install a crossbar first. For a crossbar I recommend Thule Wing Bar Evo 118 Aluminum...
    view full answer...

  • Will the DeeZee NXc Running Boards Part # DZ16202-16210 Fit a 2017 GMC Acadia Limited SLT
  • Yes, the DeeZee NXc Running Boards w Custom Installation Kit part # DZ16202-16210 are a confirmed fit for you 2017 GMC Acadia Limited SLT and come with correct mounting brackets and hardware needed for installation. I have attached a photo of these running boards on a similar suv for you.
    view full answer...

  • Recommended Westin Running Boards for 2017 GMC Acadia Limited
  • The Westin E-Series Round Nerf Bars # 23-3380 referenced in your question is confirmed to fit your 2017 GMC Acadia Limited, as long as it is not the Denali. I spoke with my contact at Westin to confirm this. These are really nice, stainless steel nerf bars that feature curved ends for a nice, finished look. The non-slip step pads sit in recessed areas and all of the necessary mounting hardware is included.
    view full answer...

  • Will the Curt Trailer Hitch Receiver C13293 Fit a 2017 GMC Acadia Denali
  • The Curt Trailer Hitch Receiver part C13293 which is a fit for a 2017 GMC Acadia will fit the Denali models. The Curt hitch offers a complete bolt-on install. The install process is super simple as well taking most only 50 minutes on average. If you will be towing then you'll also need the T-One Vehicle Wiring Harness part # 118271 which is plug-n-play, the Mounting Bracket and Installation Hardware part # PK12711U, and the etrailer Ball Mount Kit part # 989900 which has the rest of the...
    view full answer...

  • Hitch, Wiring and Brake Controller for 2017 GMC Acadia Limited
  • The trailer hitches that fit the 2017 GMC Acadia are indeed different from those that fit the Acadia Limited. Hitches for the 2017 Acadia Limited are shown on the linked page. The one I suggest is the Draw-Tite 2-inch Class III model # 75528. I like this one for its combination of price, high towing capacity and simple installation. Written instructions and a helpful install video are linked for your reference. The hitch comes complete with all mounting hardware. If your trailer has electric...
    view full answer...